Buying a Vintage Table Lamp This Diwali? 5 Things to Check Before Choosing One

Buying a Vintage Table Lamp This Diwali? 5 Things to Check Before Choosing One

A vintage table lamp is one of those things you buy with your eyes. You see a black shade with golden birds, or a wooden base with brass fittings, and you're already picturing it on the console by the front door. That's usually how a good lamp finds its way home.

But a lamp lives with you every single evening, so a few dull questions are worth asking before the pretty ones. Here are the five we'd check first. None of them take long, and all of them are easier to sort out before you click "buy" than after the box arrives.

1. Is it genuinely old, or vintage-style?

The two get mixed up a lot. A genuinely antique table lamp is old at least 100 years in age, and sometimes lovely for exactly that reason. It might also have wiring that's gone brittle, a plug that doesn't suit today's sockets, or a fitting that takes a bulb you can't buy anymore. If you find one at a flea market or in a relative's attic, get an electrician to rewire it before it goes anywhere near a switch.

A vintage-style lamp is a different thing. It's made new, with the look of an older one: the slim stem, the stepped base, the hand-painted shade. That's what ours are. They take their cues from old English libraries, Parisian cafés and the painted screens of Kyoto, but they're made today. Either kind is fine. Just know which one you're buying, and ask about the wiring in both cases.

2. Does it fit your table?

Measure the surface, not just the room. Our lamps stand about 16.5 inches (42 cm) tall, and the shade is 12 inches (30 cm) wide. That's a compact size, good for a console, a desk or one of those bedroom table lamps that sit beside the bed. But a 30 cm shade needs room, and a narrow bedside table that also holds your phone, a glass of water and a book gets crowded fast.

Here's a quick trick. Cut a piece of newspaper to 30 x 30 cm and put it on the table. If it swallows the whole surface, the lamp will too.

Then think about height. When you're sitting, the bottom of the shade should be at or just below eye level, so the bulb stays hidden. This matters even more for a study table lamp or a writing lamp, because you'll be sitting right next to it for hours.

3. What kind of light will it actually give?

Two things decide this: the shade and the bulb.

Our lamps have hand-painted iron shades. A metal shade doesn't glow the way a fabric one does. It throws light in a more defined pool, up and down, rather than all around the room. At a desk that's useful, because the light lands right where your notebook is. On a console it gives a more dramatic, focused effect. If you were hoping one lamp would light up a whole corner, a fabric shade may suit you better. That's worth knowing about metal table lamps in general. The Manor Writer's Desk Lamp, with its wooden base, brass fittings and iron shade, is a good example.

The bulb is the other half. Our lamps take an E14 LED bulb, the small screw fitting. It's easy to find online, but it isn't always the one sitting in your kitchen drawer, so buy a spare when you order the lamp. LEDs also run cooler than older bulbs, which are kinder to painted metal and wood. Stay within the wattage the fitting allows.

4. Where will the cord go?

This is the one nobody thinks about until the lamp is on the table and the plug is nowhere near a socket. Check the cord length against the distance to the nearest socket before you fall for a spot. Plenty of lamps have sat beautifully in the wrong place because of a short cord.

Diwali makes it trickier. Fairy lights, LED strings and the extra speaker all want a socket at the same time, and it's tempting to plug one extension board into another. Please don't. Pick the lamp's spot first, work out which socket it will use, and keep it off an overloaded board.

5. How will the finish cope with your home?

Hand crafted and hand painted means every lamp is slightly different, and that's part of the charm. It also means it needs gentler care than a factory-coated one. Ours should be wiped with a soft, dry cloth, with no water or cleaning products. On the Kyoto Table Lamp, don't scrub the painted surface at all.

Our lamp bases are wood and MDF, and MDF doesn't love damp. If you live somewhere humid, or the spot you have in mind gets rain splash from a window, choose a drier corner. A bedside table or a console away from the window is usually safer than a sill.

The short version

Know what you're buying, measure the table, think about the light, find the socket, and look after the finish. Do those five things and a lamp should look good for years.

Our lamps ship within 72 hours and take about 7 to 10 days to reach most pin codes, so if one is meant for Diwali, order early. And if you're still deciding on a style, our guides on Modern Farmhouse, French Country and English Cottage table lamps and statement lamps can help.

Frequently Asked Questions

What's the difference between a vintage and an antique table lamp? 

An antique lamp is genuinely old and was made around 100 years ago while a Vintage refers to something older than 20 years. A vintage-style lamp is made new in an older classic design.

What size table lamp works for a bedside table? 

A lamp around 16 to 17 inches tall with a shade about 12 inches wide suits most bedside tables, as long as there's room left for your things.

Can a metal lamp work as a study lamp for the bedroom? 

Yes. A metal shade sends light downward in a focused pool, which suits reading and writing. Pair it with a warm white LED.

What bulb does a Deodar table lamp take? 

An E14 LED bulb, the small screw fitting.

How do I clean a hand-painted metal table lamp? 

Wipe it gently with a soft, dry cloth. Avoid water, liquids and cleaning products, and don't scrub the paint.

Browse our table lamp collection to see what's available, or read our Diwali home lighting guide for the festive side of things.

Back to blog